manualshive.com logo in svg

Leica BIOSYSTEMS HistoCore BIOCUT, Instructions For Use Manual

Share
Download
Leica BIOSYSTEMS HistoCore BIOCUT Instructions For Use Manual Download Page 54

54

Version 1.7, Revision K 

 

Optional Accessories

6

6.3 

Knife holder base and knife holder

Fig. 36 

 

1

The plastic handles of all clamping levers on the 

instrument and knife holders can be turned to the 

position that is most convenient for each user.

Pull the grip 

(

→

 "Fig. 36-

1

")

 out of the lever, hold 

it in this position, and rotate it to the desired 

position. It will then lock automatically when 

released.

6.3.1  Two-in-one blade holder E

Fig. 37 

 

1

2

3

4

5

6

7

8

9

1 Blade ejector 

6

Safety guard

2 Clamping top 

7

Bolt

3 Clamping lever (left)

8

Clamping lever (right)

4 Segment arc

9

Pressure plate

5 Blade holder base

The two-in-one blade holder optimized for use with Leica Biosystems disposable blades:
low-profile blades (L x H x W): 
(80 +/-0.05) mm x (8 +0/- 0.1) mm x (0.254 +/-0.008) mm; 
high-profile blades (L x H x W): 
(80 +/-0.05) mm x (14 +0/-0.15) mm x (0.317 +/-0.005) mm.
 The two-in-one blade holder E has a lateral displacement function, so that the entire width of the blade 
can be used. It is equipped with a blade ejector to safely remove the blade after use. The pressure plate 
is replaceable.

Summary of Contents for HistoCore BIOCUT



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands