manualshive.com logo in svg

Leica BIOSYSTEMS HistoCore BIOCUT, Instructions For Use Manual

Share
Download
Leica BIOSYSTEMS HistoCore BIOCUT Instructions For Use Manual Download Page 10

10

Version 1.7, Revision K 

 

Safety

2

2. 

Safety

2.1 

Safety notes

The Instructions for Use include important information related to the operating safety and maintenance 
of the instrument.
The Instructions for Use are an important part of the product, and must be read carefully prior to startup 
and use and must always be kept near the instrument.
This instrument has been built and tested in accordance with the Safety requirements for laboratory 
instruments.
To maintain this condition and ensure safe operation, the user must observe all notes and warnings 
contained in the Instructions for Use.
The safety and caution notes in this chapter must be observed at all times. 
Be sure to read these notes even if you are already familiar with the operation and use of other Leica 
Biosystems products.
The Instructions for Use must be appropriately supplemented as required by the existing regulations on 
accident prevention and environmental safety in the operator‘s country.

Warning 

Protective devices or safety accessories provided by manufacturer have been removed or modified.

Serious injury of persons and/or property damage including specimen damage.

•  Never remove or modify any protective devices of the instrument or any accessories. Only service 

personnel qualified by Leica Biosystems may repair the instrument and access the instrument's 

internal components. 

•  Before working with the instrument always assure that all protective devices and safety 

accessories are in place and fulfill their purpose properly.

Tip 

For current information about applicable standards, please refer to the CE Declaration of Conformity 

and UKCA Certificates on our Internet site:
http://www.LeicaBiosystems.com

2.2 

Warnings

The protective devices installed in this instrument by the manufacturer only constitute the basis for 
accident prevention. Operating the instrument safely is, above all, the responsibility of the owner, as 
well as the designated personnel who operate, service or clean the instrument.
To ensure trouble-free operation of the instrument, be sure to comply with the following instructions 
and warnings.

Summary of Contents for HistoCore BIOCUT



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands