Page 84
Data entry/Programming
Group 7
Release R1.12 en
JET2 neo
or
Open job for editing
It is possible to open the currently loaded
print job in the
job editor
directly from the
main window
(1)
. The same button is also
available in the
<Main menu>
on the
<Job>
tab
(2)
.
In the
<Main menu>
on the
<Job>
tab
it is
also possible to
open a print job for editing
(3)
while the current print job remains in the
printer memory and the print job to be
edited is opend separately in the print job
editor.
Open job list for editing
It is possible to open the currently loaded
job list in the
job list editor
directly from the
main window
(1)
. The same button is also
available in the
<Main menu>
on the
<Job>
tab
(2)
.
In the
<Main menu>
on the
<Job>
tab
it is
also possible to
open a job list for editing
(3)
while the current job list is kept in the printer
memory and the job list to be edited is
opend separately in the print job editor.
Basics
Loading a print file for editing a
print job
will always be opended in the
print job editor
and a
job list
in the
job list editor
.
Please see chapter
7.4 Load job to print (Direct selection)
on page 169
for further details about this procedure.
1
2
3
Summary of Contents for JET2 neo
