Group 7
Data entry/Programming
Page 141
JET2 neo
Release R1.12 en
Note:
If no password has been entered for activated password query during the start of
the device, only the function <Login>
in the functional area „Extra“ of the main
menu is available for the current user.
After logging-out the user, this function is still only available.
The function is activated or deactivated as following:
Press the button
<Main menu>
(1). The menu opens.
Press on the register card
<Settings>
(2).
Now press on the control box
<Password active>
(3). The function is activated or
deactivated depending on the already existing status. If the function is activated, this
is displayed by a
in the control box.
Figure 80
Activate/deactivate password query
Function deactivated
Function activated
1
– Button <Main menu>
3
– Control box <Password active>
2
– Register card <Settings>
You will find further information regarding login/logout and switching on
the device in the
chapters Login/Logout
(page 103) and
Switching on
with password protection
(page 65)!
1
2
3
Summary of Contents for JET2 neo
