Leibinger JET2 neo, Manual

Page: 147 / 294

Group 7 Data entry/Programming Page 145
JET2 neo Release R1.12 en

Press on the register card <Outputs> (2) to select the functional area.

Press on the arrow button of the pop-up window of the output 1 [X3.1] (3). The
pop-up window opens for selection.

Now select the required event/signal.
You will find further information also in the chapter Interface X3
(Outputs) (page 47)!
7.2.4 Functional area Service (Service functions)
In the functional area <Service> the following submenus are available:

Info

Hydraulic/Printhead

Service interval

I/O Signal(test)

Touch calibration

Data logging

Test print
Figure 84
Functional area „Service"
1
– Button <Info>
5
– Button <Touch calibration>
2
– Button <I/O Test>
6
– Button <Test print>
3
– Button <Data logging>
7
– Button <Service interval>
4
– Button <Hydraulic/Printhead>
1
3
6
4
5
7
4
2