Leibinger JET2 neo, Manual

Page: 121 / 294

Group 7 Data entry/Programming Page 119
JET2 neo Release R1.12 en

Select the required time by scrolling the hour and minute block. The setting block is
closed by clicking on the block again or on the display window <Time> (2) and the
time is saved.

To define the time zone press on the pop-up window <Time zone> (4). The pop-up
window opens for selection.

Now select the requested time zone.
Figure 64
Set time and time zone
1
– Register card <Date/Time>
4
– Setting block <Time>
2
– Display window <Date>
5
– Pop-up window <Zeitzone>
3
– Display window <Time>
3. Automatic clock change:
The function enables you to activate or deactivate the automatic change to summer-
and wintertime (daylight savings time [DST]).
Proceeding:
E.g.:The automatic change to summer- and wintertime should be activated.

Press on the register card <Date/Time> (1) to select the functional area.

Now activate the automatic clock change by clicking on the control box (2). An
activated automatic change is displayed by

in the control box.
4
2 1
S
cr
o
ll
3
5
5