10/29
Technical data sheet: S000074637EN-5
Updated: 12/03/2015
Created: 15/04/2014
Technical data sheet
Catalogue number(s): 0 484 22
KNX multiapplication controller 16 outputs
KNX multiapp
Parameters
Setting
Long push release
No reaction
Stop
Here an adjustment is made to define which value is written into the
storage cell of the communication object and sent when releasing the
push button after a long press.
No reaction: action does not change the object value and also does not
send a telegram.
Stop: the stop command (value “1” or “0”) is transferred into the com-
munication object and sent.
Long push action min.
0.5 second
1 second
2 seconds
3 seconds
4 seconds
5 seconds
10 seconds
This parameter determines the minimum period for detecting a long
push.
add status object
Yes /
No
The parameter determines if an additional communication object
(status) shall be used to realize toggle functionality or other purposes.
Contact type
Normally open contact
Normally closed contact
The contact type of the input attached to the channel is adjusted here.
“Normally open contact”: the contact of the input is active when
closed, inactive when opened.
“Normally closed contact”: the contact of the input is active when
opened, inactive when closed.
add enable object
Yes /
No
The parameter determines if the input can be blocked via an additional
Enable object or not. If an input is blocked (Enable value = 0) the status
changes at this input are not transmitted.
8-bits scene control
No.
Object name
function
Size
flags
5
(12, 19,
26, 33, 40,
47, 54, 61,
68, 75, 82,
89, 96,
103, 110)
Input G(,H)1 (2
8) 8-bits scene 17.001
DPT_Scene-
Number
CT
The telegrams to recall the scene with the configured number
(between 1 and 64) are sent via the group address link with this object.
4
(11, 18,
25, 32, 39,
46, 53, 60,
67, 74, 81,
88, 95,
102, 109)
Input G(,H)1 (2
8) Enable
1.003 DPT_
Enable
CW
Enable telegrams are received via the group address linked with this
object. They are used to lock (disable) or unlock (enable) the corres-
ponding input.
They are only visible if“Add enable object”parameter value is set to yes.
Parameters
Scene num. on risin
This parameter dete
recalled on rising edg
If value “0” is set, no
Contact type
The contact type of
“Normally open con
closed, inactive whe
“Normally closed con
opened, inactive wh
add enable object
The parameter deter
Enable object or no
changes at this input
Priority
No.
Object n
5
(12, 19,
26, 33, 40,
47, 54, 61,
68, 75, 82,
89, 96,
103, 110)
Input G(,H)1
The telegrams with
linked with this objec
4
(11, 18,
25, 32, 39,
46, 53, 60,
67, 74, 81,
88, 95,
102, 109
Input G(,H)1
Enable telegrams are
object. They are used
ding input.
They are only visible
Value
Beha
00b
Low P
01b
Low P
10b
High P
11b
High P
•
Switch
This function is used
the contact is closed
8. COmmUNiCaTiON OBJECTS (CONTiNUED)
8. COmmUNiCa
•
Switch
Using one button, the scene with the configured number (between 1
and 64) can be recalled via a short push.
If Scene number is set to the value “0”, no scene is going to be recalled.
Parameters
Setting
Scene num. on rising edge
1
64
This parameters determines which scene (between 1 and 64) is to be
recalled on rising edge.
If value “0” is set, no scene is going to be recalled
Scene num. on falling edge
1
64
This parameters determines which scene (between 1 and 64) is to be
recalled on falling edge
If value “0” is set, no scene is going to be recalled
Contact type
Normally open contact
Normally closed contact
The contact type of the input attached to the channel is adjusted here.
“Normally open contact”: the contact of the input is active when
closed, inactive when opened.
“Normally closed contact”: the contact of the input is active when
opened, inactive when closed.
add enable object
Yes / No
The parameter determines if the input can be blocked via an additional
Enable object or not. If an input is blocked (Enable value = 0) the status
changes at this input are not transmitted.
•
Push
Using one button, the scene with the configured number (between 1 and 64)
can be recalled via a short push. If Scene number is set to the value“0”, no scene
is going to be recalled.
S000074637EN-5.indd 10
20/05/15 10:16
