manualshive.com logo in svg

LeCroy 9300C Series, Operator'S Manual

The LeCroy 9300C Series Operator's Manual is a comprehensive resource for users of this cutting-edge product. Available for free download at manualshive.com, this manual equips you with the knowledge to fully utilize the features and functionalities of the LeCroy 9300C Series, ensuring seamless operation and optimal performance.

Share
Download
background image

1

–2

Read This First!

Product Assistance

Help on installation,  calibration, and the use of LeCroy
equipment is available from the LeCroy Customer Service
Department in your country (

see contact numbers following the

index

).

Maintenance Agreements

We provide a variety of customer support services. Maintenance
agreements give extended warranty and allow our clients to
budget maintenance costs after the initial three-year warranty
has expired. Other services such as installation, training,
enhancements and on-site repairs are available through special
Supplemental Support Agreements.

Staying Up to Date

LeCroy is dedicated to offering state-of-the-art instruments,
continually refining and improving the performance of our
products. Because of the speed with which physical
modifications may be implemented, this manual and related
documentation may not agree in every detail with the products
they describe. For example, there might be small discrepancies
in the values of components affecting pulse shape, timing or
offset, and —   infrequently —   minor logic changes.

However, be assured the scope itself is in full order and
incorporates the most up-to-date circuitry.

We frequently update firmware or software during servicing to
improve scope performance, free of charge during warranty. We
will keep you up to date with such changes, through new or
revised manuals and other publications.

But you should retain this, the original manual, for future
reference to your scope’s unchanged hardware
specifications.

Service and Repair

Please return products requiring maintenance to the Customer
Service Department in your country or to an authorized service
facility. LeCroy will repair or replace any product under warranty
free of charge. The customer is responsible for transportation
charges to the factory, whereas all in-warranty products will be
returned to you with transportation prepaid. Outside the warranty
period, you will need to provide us with a purchase order
number before we can repair your LeCroy product. You will be

Summary of Contents for 9300C Series




















































































































































































































































































Reviews:

No comments

Related manuals for 9300C Series

GE Vivid E9 Service Manual preview
Vivid E9
Brand: GE Pages: 802
iET SRL Series Operation Manual preview
SRL Series
Brand: iET Pages: 17
NAD M52 Owner'S Manual preview
M52
Brand: NAD Pages: 10
XAG P30 Quick Start Manual preview
P30
Brand: XAG Pages: 24
KBT Optima Instructions For Use Manual preview
Optima
Brand: KBT Pages: 12
ABS ABS-Lock DH04 Series Manual preview
ABS-Lock DH04 Series
Brand: ABS Pages: 4
idi MDS Installation & Operator'S Manual preview
MDS
Brand: idi Pages: 20
G&G FPX Series Installation Manual preview
FPX Series
Brand: G&G Pages: 2
H&S 5226 Operator'S Manual preview
5226
Brand: H&S Pages: 46
Pari mini Instructions For Use Manual preview
mini
Brand: Pari Pages: 50
Icare HOME Instruction Manual preview
HOME
Brand: Icare Pages: 42
JBL EON15 Introduction And General Information preview
EON15
Brand: JBL Pages: 38
JBSYSTEMS Light FALCON Operation Manual preview
FALCON
Brand: JBSYSTEMS Light Pages: 32
JBM 53724 Manual preview
53724
Brand: JBM Pages: 12
Latham 309 Installation Manual preview
309
Brand: Latham Pages: 4
SafeWaze LATITUDE Manual preview
LATITUDE
Brand: SafeWaze Pages: 23
Taylor C712 Operator Training preview
C712
Brand: Taylor Pages: 41
Raven RS1 Guidance And Steering Installation Manual preview
RS1
Brand: Raven Pages: 48

Brands by name

Popular brands

Load more brands