manualshive.com logo in svg

LeCroy 9300C Series, Operator'S Manual

Share
Download
LeCroy 9300C Series Operator'S Manual Download Page 109

11

–1

11

Display

Setting Up the Display

DISPLAY SETUP

Press 

 

to view the DISPLAY SETUP menus (

see page

11–6) 

and select from:

 

Ø

 

Standard or XY Mode

Ø

 

Single, Dual or Quad grids

Ø

 

Persistence

Ø

 

Dot Join

Ø

 

Display and grid intensities

Ø

 

“More Display Setup” menus.

Standard or XY Display?

Standard

 Display Mode (

menus page

 

11–6

) allows presentation of

source waveforms versus time (or versus frequency for FFTs).   

XY

 Display Mode (

menus page

 

11–9)

 compares and contrasts one

source waveform with another, and  is used when selected traces
have the same time or frequency span (time/div) and horizontal unit
(in seconds or Hertz). XY is automatically generated as soon as two
compatible traces are selected. If incompatible traces are selected,
a warning message is displayed at the top of the screen. And if
compatible traces are not matched in time, their XY diagram will be
displayed showing the shifting in time or in frequency between
them. (The 

∆

T or 

∆

f indicator is displayed in the Displayed Trace

Label at left-of-screen.)

Persistence

In Persistence Mode, the oscilloscope can display points so that
they accumulate on-screen over many acquisitions. Persistence can
be used in either Standard or XY display. Eye diagrams and
constellation displays can be made using persistence, and the most
recent sweep can be displayed as a “vector” trace over the
Persistence display. Persistence is activated by selection of the
“DISPLAY SETUP” “Persistence” menu (

11–6

).

See:

 “Picturing Signal History”, in the 

Hands-On Guide

, for

more details on using Persistence.

Summary of Contents for 9300C Series




















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands