11. ETHERNET REMOTE CONTROL
108
Command
Parameter
SYS:INFO:BOARD:COMPOSITE_VIDEO
? (Return value: 0 (not installed) / 1 (installed))
SYS:INFO:BOARD:AUDIO_ANALOG
? (Return value: 0 (not installed) / 1 (installed))
SYS:INFO:BOARD:AUDIO_OP70
? (Return value: 0 (not installed) / 1 (installed))
SYS:SHORTCUT
DIRECT / VOLUME / CAP&WRIT / INTEN / MENU_OFF
/ ?
SYS:INIT
None
SYS:KEYLOCK
OFF / ON / ?
REMOTE:REPLY
OFF / ON / ? (return value on or off. The factory default
setting is off.)
* When set to ON, the following return values are
output.
OK: The command was processed properly.
ERR1: The value of a parameter was outside of its
acceptable range.
ERR2: The command is invalid in the current
condition.
Table 11-2 LV 5770SER08 and LV 5770SER09A commands
Command
Parameter
WFM
None
WFM:CH1
ON / OFF / ?
WFM:CH2
ON / OFF / ?
WFM:CH3
ON / OFF / ?
WFM:OVLAY
ON / OFF / ?
WFM:INTEN:WFM
-128 to 127 / ?
WFM:COLOR
WHITE / YELLOW / CYAN / GREEN /
MAGENTA / RED / BLUE / MULTI / ?
WFM:COLOR:2MAP_S1
WHITE / YELLOW / CYAN / GREEN /
MAGENTA / RED / BLUE / MULTI / ?
WFM:COLOR:2MAP_S2
WHITE / YELLOW / CYAN / GREEN /
MAGENTA / RED / BLUE / MULTI / ?
WFM:INTEN:SCALE
-8 to 7 / ?
WFM:SCALE:COLOR
WHITE / YELLOW / CYAN / GREEN /
MAGENTA / RED / BLUE / ?
WFM:SCALE:UNIT
HDV_SDP / HDV_SDV / HDP_SDP / 150P /
1023 / 3FF / 1023_255 / ?
WFM:SCALE:COLOR75P
ON / OFF / ?
WFM:GAIN:VAR
CAL / VAR / ?
WFM:GAIN:VAL
0.200 to 10.000 / ?
WFM:GAIN:MAG
X1 / X5 / ?
WFM:FILTER:NORMAL
FLAT / LOWPASS / ?
WFM:FILTER:COMPOSITE
FLAT / LUM / FLAT_LUM / LUM_CRMA / ?
WFM:SWEEP:SWEEP
H / V / ?
WFM:SWEEP:H_SWEEP
1H / 2H / ?
WFM:SWEEP:V_SWEEP
1V / 2V / ?
