13. CHANGE HISTORY OF THE SOFTWARE
193
13. CHANGE HISTORY OF THE SOFTWARE
This manual was written for firmware version 3.4.
You can view the firmware version by pressing
F•3
SYSTEM INFO on the system menu.
Ver. 3.4
•
[LV 5770SER08 and LV 5770SER09A] An audio signal gate setting function was added to the
lip sync measurement of the status display.
Ver. 3.2
•
[LV 5770SER08 and LV 5770SER09A] A measurement range setting function was added to
the lip sync measurement of the status display.
Ver. 3.1
•
[LV 7770] Recall menu was improved so that each time the RCLL key is pressed, the menu
toggles between show and hide.
Ver. 2.9
•
[LV 5770SER08 and LV 5770SER09A] 3G-SDI lip sync measurement is now supported.
Ver. 2.2
•
[LV 5770SER08 and LV 5770SER09A] The video signal waveform display now includes
1023,255 for SCALE UNIT.
•
[LV 5770SER08 and LV 5770SER09A] The picture display now supports SD 16:9 display.
•
[LV 7770] The Dolby option now supports indicator display of frame location. (Dolby E only)
•
[LV 7770] The Dolby option now supports non-PCM flags.
Ver. 2.1
•
[LV 7770] On the loudness display, a feature that indicates relative gating that is less than or
equal to the threshold has been added.
•
[LV 7770] On the loudness display, a feature that indicates true peaks that exceed the
threshold has been added.
•
[LV 7770] On the loudness display, a feature that enables you to select the content of the chart
display during two input (MAIN and SUB) measurement from integrated, momentary, and
short-term has been added.
Ver. 2.0
•
[LV 5770SER09A] Support has been added for the SDI INPUT/EYE option.
Ver. 1.9
•
[LV 7770] Simultaneous 16-channel audio display feature has been added.
Ver. 1.4
•
[LV 5770SER08 and LV 5770SER09] A format ID display has been added to the NET-Q
analysis display.
Ver. 1.3
•
[LV 5770SER08 and LV 5770SER09] The CINELITE Advanced feature has been added.
