4. BEFORE YOU BEGIN MEASURING
53
4.7.2
Function Menu Operations
This section explains how to operate the function menu, using the function menu on the
vector display as an example.
The function menu items correspond to
F•1
to
F•7
.
Figure 4-15 Function menu operations
•
Selecting a Setting
To select a setting from a list like the one shown in the figure above for
F•2
GAIN MAG,
press
F•2
repeatedly to select the setting you want. The setting changes each time you
press
F•2
. After you stop pressing
F•2
, the setting is confirmed and the pop-up menu
disappears.
•
Changing a Value
To set the value of a setting like
F•3
GAIN VARIABLE, which is shown in the figure
above, press
F•3
, and then turn the function dial (F
•
D). You can reset most settings to
their default values by pressing the function dial (F
•
D).
4.7.3
Tab Menu Operations
Normally, the function menus are used to configure the various settings. However, tab
menus—such as that shown below—are displayed in some situations.
This section explains how to operate the tab menu, using the GENERAL SETUP tab menu
as an example.
Figure 4-16 Tab menu operations
