6. DETAILED MEASUREMENT EXAMPLES
67
6.8
Analog Audio Signal Output
You can perform a D/A conversion on and generate up to eight channels of embedded audio
signals or external digital audio signals as analog audio signals from the rear panel ANALOG
AUDIO connector.
This section will show the procedure for generating embedded audio signals.
•
Required Optional Unit
•
LV 5770SER42(ANALOG AUDIO)
•
LV 5770SER08(SDI INPUT) or LV 5770SER09A(SDI INPUT/EYE)
(This is not required if you want to generate external digital audio signals.)
1. Apply an SDI signal to SDI INPUT A or SDI INPUT B on the rear panel.
2. Press SYS.
3. Press F
•
1 FORMAT IN OUT and then F
•
3 NEXT TAB. Set ANALOG AUDIO to OUTPUT.
Figure 6-8 REAR PANEL SETUP tab
4. Press F
•
1 COMPLETE.
5. Press AUDIO.
6. Press
F•1
SOURCE SELECT and then
F•2
1ST GRP SELECT or
F•3
2ND GRP SELECT to
select the measurement group.
For details about the output signals during 16-channel measurement, see section 7.1.2,
“Rear Panel Settings.”
