11. ETHERNET REMOTE CONTROL
104
11. ETHERNET REMOTE CONTROL
The LV 7770 can be remotely controlled through its Ethernet port on the rear panel.
Controlling an LV 7770 remotely through its Ethernet interface has only been confirmed to work
in a local network environment. LEADER does not guarantee that this feature will work in any
network environment.
11.1 TELNET
From a PC connected to the same network as the LV 7770, most of the operations that you can
perform from the front panel can be controlled remotely.
11.1.1
Procedure
1. Configure the Ethernet settings on the LV 7770's ETHERNET SETUP tab.
Set the IP Address, and set TELNET Server Select to ON.
You cannot use the LV 7770-01 (REMOTE CONTROLLER) while you are using
TELNET. Conversely, if you set LV7770-01 to ON, you cannot use TELNET.
Reference 7.2.2, "Configuring Ethernet Settings"
SYS
→
F
•
2
SYSTEM SETUP →
F
•
3
NEXT TAB →
Figure 11-1 ETHERNET SETUP tab
2. Press
F•1
COMPLETE.
The message "Saving data - Please Wait" is displayed.
3. If you changed the IP address, after the message disappears, restart the LV 7770.
The new IP address will take effect.
4. Connect the LV 7770's Ethernet port to the network.
Use a UTP cable (category 5).
