8. CAPTURE FEATURE
92
8.2.4
Displaying Frame Capture Data Saved to a USB Memory Device
To display or overlay on the current input signal the frame capture data that has been saved
to USB memory as .frm files, follow the procedure below.
(Frame capture data that has been saved in FRM format on a different model cannot be
displayed on the LV 7770.)
1. Press
F•
6 RECALL on the capture menu.
The file list display appears.
This menu item appears when a USB memory device has been connected to the LV
7770.
Figure 8-11 File list display
2.
Turn the function dial (F•D) to select the .
frm file that you want to display.
3. Press
F•
1 RECALL.
To display frame data, the LV 7770 must be receiving a signal whose format is the same
as that of the saved data. The FORMAT item at the bottom of the display shows the
format of the saved data. It is displayed in green if the format is the same as the current
format or in red if the format is not the same. If the FORMAT item is in red,
F•1
RECALL
does not appear.
4. Press
F•
3 DISPLAY to select the display format.
After you press
F•1
RECALL, the display format is BOTH.
