manualshive.com logo in svg

Leader LV 5381, Instruction Manual

The Leader LV 5381 is a high-quality video waveform monitor designed to provide accurate monitoring and analysis of video signals. With its comprehensive features and capabilities, it ensures optimal video quality. You can easily access the detailed Instruction Manual for free download from our website, manualshive.com.

Share
Download
background image

11. VIDEO SIGNAL WAVEFORM DISPLAY 

112

 

11.4 

Configuring Gain and Sweep Settings 

To configure gain and sweep settings, press F•2 GAIN/SWEEP on the video signal waveform 
menu. 

 

WFM 

→

 F•2 GAIN/SWEEP 

→

 

 

Figure 11-9  GAIN/SWEEP menu 

 

11.4.1 

Switching between the Overlay and Parade Displays 

To switch between the overlay and parade displays, follow the procedure below. 
This setting is invalid when COLOR MATRIX is set to COMPOSIT. 

For information on the COLOR MATRIX setting, see section 11.6.1, “Selecting the Display Format.” 

Procedure 

WFM 

→

 F•2 GAIN/SWEEP 

→

 F•1 MODE: OVERLAY / PARADE 

 

MODE = OVERLAY 

MODE = PARADE 

   

 

Figure 11-10    Overlay and parade displays 

 

11.4.2 

Selecting the Sweep Method 

To select the video signal waveform sweep method, follow the procedure below. 
The sweep methods that you can select vary depending on the F•1 MODE setting and the 
input format. 
The field and frame displays are not available in simultaneous input mode and 3D assist 
mode (L/R DUAL)(option). 

For information on simultaneous input mode and 3D assist mode, 

 see section 4.3.1, “Switching the Input Mode.” 

Procedure 

WFM 

→

 F•2 GAIN/SWEEP 

→

 F•2 SWEEP: 

H / V_F1 / V_F2 (When the input signal is i/sF and the parade display mode is being used.) 
H_1H / H_2H / V_F1 / V_F2 / V_2V (When the input signal is i/sF and the overlay display 
mode is being used.) 
H / V (When the input signal is p and the parade display mode is being used.) 
H_1H / H_2H / V (When the input signal is p and the overlay display mode is being used.) 

Summary of Contents for LV 5381

































































































































































































































Reviews:

No comments

Related manuals for LV 5381

CAIRE Focus Quick Reference Manual preview
Focus
Brand: CAIRE Pages: 2
ACE INSTRUMENTS WAVE Operating Manual preview
WAVE
Brand: ACE INSTRUMENTS Pages: 15
Wave Fitness Neptune Owner'S Manual preview
Neptune
Brand: Wave Fitness Pages: 15
Bante Instruments ORPscan10 User Manual preview
ORPscan10
Brand: Bante Instruments Pages: 6
K-9 Lights Bulldog User Manual preview
Bulldog
Brand: K-9 Lights Pages: 12
T&D TR-73U User Manual preview
TR-73U
Brand: T&D Pages: 28
Kelso KCM65 Product Manual preview
KCM65
Brand: Kelso Pages: 21
Kattsafe SL1 Operation Manual preview
SL1
Brand: Kattsafe Pages: 19
Elenco Electronics ST-751 Assembly Instructions Manual preview
ST-751
Brand: Elenco Electronics Pages: 12
GRAVITY FT 01 LT T B Manual preview
FT 01 LT T B
Brand: GRAVITY Pages: 2
Hella Gutmann mega macs 50 Quick Start Manual preview
mega macs 50
Brand: Hella Gutmann Pages: 48
Qtx B12P User Manual preview
B12P
Brand: Qtx Pages: 6
Stocks AG Turbo Jet 10 i-CON Operating Manual And Parts List preview
Turbo Jet 10 i-CON
Brand: Stocks AG Pages: 30
E-LINK LNK-INJ-48-95W Quick Start Manual preview
LNK-INJ-48-95W
Brand: E-LINK Pages: 4
BSi BT-71 Operation Manual preview
BT-71
Brand: BSi Pages: 2
Kellfri 27-MD500 Operating Instructions Manual preview
27-MD500
Brand: Kellfri Pages: 48
Foxfury Lighting Solutions 200-400-100 Product Manual preview
200-400-100
Brand: Foxfury Lighting Solutions Pages: 17
CA.MI Miko User Manual preview
Miko
Brand: CA.MI Pages: 40

Brands by name

Popular brands

Load more brands