9. PICTURE DISPLAY
90
CINELITE ADVANCE = P+V+W
Figure 9-27 Displaying synchronized markers
If P+V or P+V+W is selected, the measured values of the selected measurement point are
displayed in the lower left of the vector display.
Measured values are displayed using the following references: Cb at position B = 100.0%
and Cr at position R = 100.0%. The distance from the center is expressed as “d,” and hue
is expressed as “deg.”
Normally, markers P1 to P3 are displayed in light blue and REF in red. When they fall
outside the display, they blink in red. If this occurs, “OVER” appears above the measured
values.
Figure 9-28 Marker description
