manualshive.com logo in svg

Lauda RE 1050 G, Operating Instructions Manual

Share
Download
Lauda RE 1050 G Operating Instructions Manual Download Page 3

 

ECO GOLD 

 

28.04.10

/ 

YACE0088

 

First some safety information

 

3

 

 

First some safety information

 

 

Before you put the device into operation, read all the instructions and safety informa-

tion thoroughly. If you have any queries, please feel free to call us. 

 

Follow the instructions about siting, setting up and operation as only then can im-

proper handling of the device be eliminated and the full warranty coverage main-

tained. 

 

•

  Transport the device with care. 

•

  The cooling thermostats should never be tilted nor stood upside down. 

 

•

  The device can be damaged: 

−

 by 

dropping, 

−

 by 

vibration. 

 

•

  The device may only be operated by appropriately instructed persons.  

The operator must be of legal age. Persons not of legal age may only operate the 

device under supervision of an instructed and legal age person.  

 

•

  Never operate the device without heat transfer liquid. 

 

•

  Do not operate the device, if

:

 

−

  it is damaged, 

−

  it is leaking, 

−

  the mains cable is damaged. 

 

•

  Switch off the device and withdraw the mains plug when: 

−

  carrying out service or repair work, 

−

  moving the device, 

−

  installing or removing modules or accessories. 

 

•

  Empty the bath before moving the device. 

 

•

  Do not make technical modifications to the device. 

 

•

  Have service and repair work carried out only by specialists. 

 

The operating instructions contain additional safety information which is identified 

with a triangle with an exclamation mark 

. Read the instructions thoroughly 

and follow them. Ignoring the instructions can lead to severe consequences, e.g. 
damage to the device or other property, or to personal injury. 

Technical modifications reserved. 

Summary of Contents for RE 1050 G






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands