Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
86
of
473
MAC-based VLAN
Configuration
The MAC address to VLAN ID mappings can be configured here. This page lets you add and delete MAC-based
VLAN Classification List entries and assign the entries to different ports.
Web Interface
To configure MAC address-based VLAN parameters in the web UI:
1.
Click VLAN Management, MAC-based VLAN, and Configuration.
2.
Click “Add New Entry”.
3.
Specify the MAC address and VLAN ID.
4.
Click the desired Port Members checkboxes.
5.
Click Apply.
Figure 5-4.1: MAC-based VLAN Membership Configuration
Parameter descriptions
:
MAC Address
: Indicates the MAC address.
VLAN ID
: Indicates the VLAN ID.
Port Members
: A row of check boxes for each port is displayed for each MAC to VLAN ID mapping entry.
To include a port in the mapping, check the box. To remove or exclude the port from the mapping, make sure
the box is unchecked. By default, no ports are members, and all boxes are unchecked.
Buttons
Add New Entry
: Click to add a new MAC-based VLAN entry. An empty row is added to the table, and the MAC-
based VLAN entry can be configured as needed. Any unicast MAC address can be configured for the MAC-based
VLAN entry. No broadcast or multicast MAC addresses are allowed. Valid VLAN ID values are 1 - 4095.
