Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
232
of
473
Target IP Filter
: Specify the target IP filter for this specific ACE.
Any
: No target IP filter is specified. (Target IP filter is "don't-care".)
Host
: Target IP filter is set to Host. Specify the target IP address in the Target IP Address field that
appears.
Network
: Target IP filter is set to Network. Specify the target IP address and target IP mask in the Target
IP Address and Target IP Mask fields that appear.
Target IP Address
: When "Host" or "Network" is selected for the target IP filter, you can enter a specific target
IP address in dotted decimal notation.
Target IP Mask
: When "Network" is selected for the target IP filter, you can enter a specific target IP mask in
dotted decimal notation.
ARP Sender MAC Match
: Specify whether frames can hit the action according to their sender hardware address
field (SHA) settings.
0
: ARP frames where SHA is not equal to the SMAC address.
1
: ARP frames where SHA is equal to the SMAC address.
Any
: Any value is allowed ("don't-care").
RARP Target MAC Match
: Specify whether frames can hit the action according to their target hardware address
field (THA) settings.
0
: RARP frames where THA is not equal to the target MAC address.
1
: RARP frames where THA is equal to the target MAC address.
Any
: Any value is allowed ("don't-care").
IP/Ethernet Length
: Specify whether frames can hit the action according to their ARP/RARP hardware address
length (HLN) and protocol address length (PLN) settings.
0
: ARP/RARP frames where the HLN is not equal to Ethernet (0x06) or the (PLN) is not equal to IPv4
(0x04).
1
: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4 (0x04).
Any
: Any value is allowed ("don't-care").
Ethernet
: Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD)
settings.
0
: ARP/RARP frames where the HLD is not equal to Ethernet (1).
1
: ARP/RARP frames where the HLD is equal to Ethernet (1).
Any
: Any value is allowed ("don't-care").
IP
: Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO)
settings.
0
: ARP/RARP frames where the PRO is not equal to IP (0x800).
1
: ARP/RARP frames where the PRO is equal to IP (0x800).
Any
: Any value is allowed ("don't-care").