Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
187
of
473
Figure11-1.2: Privilege Level Configuration
Parameter description
s:
Group Name
: The name identifying the privilege group. In most cases, a privilege level group consists of a single
module (e.g., LACP, RSTP or QoS), but a few of them contains more than one. The following defines these
privilege level groups in detail:
System
: Contact, Name, Location, Timezone, Daylight Saving Time, Log.
Security
: Authentication, System Access Management, Port (contains Dot1x port, MAC based and the
MAC Address Limit), ACL, HTTPS, SSH, ARP Inspection, IP source guard.
IP
: Everything except 'ping'.
Port
: Everything except 'Cable Diagnostics'.
Diagnostics
: 'ping' and 'Cable Diagnostics'.
Maintenance
: CLI- System Reboot, System Restore Default, System Password, Configuration Save,
Configuration Load and Firmware Load. Web- Users, Privilege Levels and everything in Maintenance.
Debug
: Only present in CLI.
Privilege Levels
: The Privilege Levels can be configured to 0 - 15 (where 0 is lowest level and 15 is highest level).
Every group has an authorization Privilege level for the following sub groups: read-only, read-write. User
Privilege should be same or greater than the authorization Privilege level to have the access to that function.
Buttons
Apply
: Click to save changes.
Reset
: Click to undo any changes made locally and revert to previously saved values.
