Lantronix SGX 5150 User Manual Download

Page: 6 / 142

SGX 5150 IoT Device Gateway User Guide

QoS Statistics and Configuration  __________________________________________57
To View and Configure Wired Network (USB) QoS Settings  _____________________58
Wired (usb0) Network Failover  ____________________________________________58
To View and Configure Wired (USB0) Network Failover Settings  _________________59

Protocol Stack ____________________________________________________________59

IP Settings ___________________________________________________________59
To Configure IP Protocol Stack Settings ____________________________________59
ICMP Settings _________________________________________________________60
To Configure ICMP Protocol Stack Settings __________________________________60
ARP Settings _________________________________________________________60
To Configure ARP Network Stack Settings __________________________________61

VPN ____________________________________________________________________61

Configuring VPN Settings ________________________________________________63

Wi-Fi Protected Setup ______________________________________________________63

To Initiate WPS ________________________________________________________63
To Show WPS Status ___________________________________________________64

WLAN Scan/QuickConnect __________________________________________________64

To View WLAN Link Scan and Status Information _____________________________65

WLAN Profiles ____________________________________________________________65

Configuring WLAN Profile Settings _________________________________________66

7: Filesystem

File Transfer and Modification ________________________________________________69

To View, Transfer, or Modify Filesystem Files ________________________________70

8: Diagnostics

DNS ____________________________________________________________________71

Accessing the DNS Settings ______________________________________________71

Hardware ________________________________________________________________72

To View Hardware Information ____________________________________________72

IP Sockets _______________________________________________________________72

To View the List of IP Sockets ____________________________________________72

Log ____________________________________________________________________73

To Configure the Diagnostic Log Output ____________________________________73

Memory _________________________________________________________________73

To View Memory Usage _________________________________________________73

Ping ____________________________________________________________________73

To Ping a Remote Host _________________________________________________74

Processes _______________________________________________________________74

To View Process Information _____________________________________________74

Routes __________________________________________________________________74
Threads _________________________________________________________________75

To View Thread Information ______________________________________________75

Summary of Contents for SGX 5150















































































































































Search results

Summary of Contents for SGX 5150

Reviews:

Related manuals for SGX 5150

Brands by name

Popular brands

Lantronix SGX 5150, User Manual

Search results

Summary of Contents for SGX 5150

Reviews:

Related manuals for SGX 5150

Brands by name

Popular brands