9: Administration
SGX 5150 IoT Device Gateway User Guide
98
TM
Table 9-26 MACH10 Client Configuration
Table 9-27 MACH10 Client Advanced Configuration
To Configure MACH10 Line 1 or Line 2
Note:
The following section describes the steps to view and configure MACH10 Line 1
settings; these steps also apply to Line 2.
MACH10 Client
Description
State
Click to enable or disable the MACH10 client.
Status Update
Interval
Enter the
Status Update Interval
in minutes.
Content Check
Interval
Enter the
Content Check Interval
in hours.
Apply Firmware
Updates
Select to enable or disable the automatic setting.
Apply Configuration
Updates
Select when to
Apply Configuration Updates
from the drop-down menu:
Never
: signifying no configuration updates will be applied.
If unchanged
: signifying configuration updates will only be applied if no
changes have been made locally.
Always
: signifying configuration updates will always apply.
Reboot After Update
Automatically reboot device after firmware or configuration update.
Note:
Setting causes automatic reboot after a firmware update.
MACH10 Client
Description
Host
Enter the host name or IP address
Port
Enter the MACH10 port
Secure Port
Click to enable or disable the MACH10 client secure port 443.
Validate Certificates
Click to enable or disable the MACH10 client
Validate Certificates
.
Local Port
Enter the local port for the SMTP protocol. When configured, a total of 16
consecutive ports will be reserved.
MQTT State
Enable or Disable MQTT.
MQTT Host
Hostname or IP address of MQTT server.
MQTT Port
Update the port of MACH10 MQTT server. When configured, a total of 32
consecutive ports will be reserved.
MQTT Security
Enable SSL for MQTT.
MQTT Local Port
Enter the local port of MACH10 MQTT client. When configured, a total of 32
consecutive ports will be reserved.
Device ID
Enter the MACH10 Device ID.
Device Key
Enter the MACH10 Device Key.
Device Name
Enter the MACH10 Device Name.
Device Description
Enter the MACH10 Device Description.
Submit (button)
Click the
Submit
button to enter the settings. The
Submit
button appears when
new settings are entered.
