9: Administration
SGX 5150 IoT Device Gateway User Guide
103
TM
Using the CLI
To enter the command level:
enable > config > smtp
Using XML
Include in your file:
<configgroup name=”smtp”>
SNMP Settings
Simple Network Management Protocol (SNMP) settings may be viewed and configured in this
section.
Table 9-35 SNMP Settings
SNMP Settings
Description
SNMP Agent
State
Select to enable or disable the SNMP agent state.
Port
Set the port of the SNMP agent.
Version
Select the SNMP version used by the SNMP agent.
Read Community
Specify the read community used by the agent (defaults to public community).
Write Community
Specify the write community used by the agent (defaults to private community).
System MIB
System Contact
Specify the system contact.
System Name
Update the system name, as necessary. The default system name is .
System Description
Update the system description, as necessary. The default system information
includes the manufacturer name, model name, version and the serial number of the
SGX 5150 gateway.
System Location
Specify a system location for the SNMP setting.
MIB
Lantronix MIB File
Click the Lantronix MIB file name to save and load it into the MIB browser and trap
receiver. This is the base MIB file for Lantronix products. Load or compile this file
first.
MIB File
Click the MIB file name to save and load it into the MIB browser and trap receiver.
This is the product specific MIB file. Load or compile this after the Lantronix MIB
File.
SNMP Traps
Primary Destination
Enter the Primary Destination.
Note:
SNMP Traps fields become available when SNMP Agent State is enabled.
Primary Destination
Port
Enter the Primary Destination port.
Note:
SNMP Traps fields become available when SNMP Agent State is enabled.
Secondary
Destination
Enter the Secondary Destination.
Note:
SNMP Traps fields become available when SNMP Agent State is enabled.
