9: Administration
SGX 5150 IoT Device Gateway User Guide
99
TM
This page displays the configuration and status for MACH10 Line client.
Table 9-28 MACH10 Line
To Configure MACH10 USB 1
This page displays the configuration and status for MACH10 Line client.
Table 9-29 MACH10 Client USB
To Configure MACH10
Using Web Manager
To configure MACH10 Client, on the
Administration
page, click
MACH10 > Client
..
To configure MACH10 Line 1, on the
Administration
page, click
MACH10 > Line 1
.
To configure MACH10 Line 2, on the
Administration
page, click
MACH10 > Line 2
.
To configure MACH10 USB 1, on the
Administration
page, click
MACH10 > USB 1
.
Using the CLI
To enter the command level:
enable > config > mach10
MACH10 Line
Description
State
Click to enable or disable the MACH10 line client.
Project Tag
Enter the
MACH10 Project Tag
name.
Status Update
Interval
Enter the
Status Update Interval
in minutes. The status update interval is the
frequency in which the gateway will contact the MACH10 server.
Content Check
Interval
Enter the
Content Check Interval
in hours. The content check interval is the
frequency in which the gateway contacts the server for new content.
Command Deliminiter
Enter the Command Delimiter for attached serial devices.
Note:
Send delimiter before command and after response is received.
Local Port
Enter the local port for the MACH10 client. When configured, a total of 16
consecutive ports will be reserved.
Submit (button)
Click the
Submit
button to enter the settings. The
Submit
button appears when
new settings are entered.
MACH10 USB
Description
State
Click to enable or disable the MACH10 USB client.
Project Tag
Enter the
MACH10 Project Tag
name.
Status Update
Interval
Enter the
Status Update Interval
in minutes. The status update interval is the
frequency in which the gateway will contact the MACH10 server.
Content Check
Interval
Enter the
Content Check Interval
in hours. The content check interval is the
frequency in which the gateway contacts the server for new content.
Command Deliminiter
Enter the Command Delimiter for attached serial devices.
Note:
Send delimiter before command and after response is received.
Local Port
Enter the local port for MACH10 client. When configured, a total of 16 consecutive
ports will be reserved.
