9: Administration
SGX 5150 IoT Device Gateway User Guide
114
TM
To access System settings:
Using Web Manager
To access System settings with options to set up a reboot schedule, reboot, restore factory
defaults, upload new firmware, reboot the standalone firmware installer, update the system
name (long or short names) or to view the current configuration, on the
Administration
page,
click
System
.
Using the CLI
To reboot or restore factory defaults, enter the System command level:
enable
To setup a reboot schedule, update the system name (long or short names), enter the Device
command level:
enable > device
Using XML
Include in your file:
<configgroup name=”xml import control”>
Include in your file:
<configgroup name="reboot schedule">
Include in your file:
<configgroup name="device">
Terminal
You can configure whether each serial line or the Telnet/SSH server presents a CLI or a Login
Connect menu when a connection is made.
Table 9-46 Terminal on Network and Line Settings
Standalone Firmware
Installer
Click
Reboot to Standalone Firmware Installer
to reboot the SGX 5150
gateway to a standalone firmware installer mode. When the SGX 5150
gateway is rebooted, your browser should be refreshed and redirected to the
firmware installer page after 30 seconds. Upload and install new device
firmware from that page.
Short Name
Enter a short name for the system name. A maximum of 32 characters are
allowed.
Long Name
Enter a long name for the system name. A maximum of 64 characters are
allowed.
Terminal on Network
and Line Settings
Description
Terminal Type
Enter text to describe the type of terminal. The text will be sent to a host via IAC.
Note:
IAC means, “interpret as command.” It is a way to send commands over
the network such as
send break
or
start echoing
. IAC is only supported in
Telnet.
Login Connect Menu
Select the interface to display when the user logs in. Choices are:
Enabled
= shows the Login Connect Menu.
Disabled
= shows the CLI (default)
System Settings
Description
