SGX 5150 IoT Device Gateway User Guide
23
TM
3: Installation of the SGX 5150
This chapter describes how to install the SGX 5150 device gateway. It contains the following
sections:
Warning:
This is a Class B product based on the standard of the Voluntary
Control Council for Interference from Information Technology
Equipment (VCCI). If this is used near a radio or television receiver in a
domestic environment, it may cause radio interference. Install and use
the equipment according to the instruction manual.
Package Contents
The SGX 5150 package includes the following items:
SGX 5150 IoT device gateway
2 external antennas with RP-SMA connectors
Type A to type C USB cable
Note:
This cable is compliant to the specification mandated 56k
Ω
pull-up.
SGX 5150 IoT Device Gateway Quick Start Guide
Note:
External power supply
IS NOT
provided with the SGX 5150 gateway.
User-Supplied Items
To complete your installation, you need the following items:
RS-232/422/485 serial device(s) requiring network connectivity
A serial cable for each serial device
-
A null modem cable to connect the serial port to another DTE device.
-
A straight-through modem cable to connect the serial port to a DCE device
An available connection to your Ethernet network and an Ethernet cable
Power supply
5V supply through Type A to Type C USB cable, OR
Optional 12 VDC (10W, 2.1 mm barrel connector) wall cube power supply (Lantronix part
number 520-154-R or equivalent)
