![background image](http://html1.mh-extra.com/html/land-pride/accu-z-razor-zsr54/accu-z-razor-zsr54_service-manual_3492502035.webp)
35
Section 6: Wheels
7/30/12
ZSR54 & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-388SM
Table of Contents
Figure 6-13
Figure 6-14
33742
33743
Rear Drive Wheel Removal
Refer to Figure 6-13:
1.
Chock the front caster wheels to secure mower and
prevent movement while repairs are made.
2.
Loosen the rear drive wheel lug nuts. Do not remove
at this time.
3.
Raise and secure the rear of the mower.
4.
Remove the rear drive wheel lug nuts and remove
the wheel from the axle hub.
Rear Drive Wheel Installation
Refer to Figure 6-14:
1.
Align and install the rear drive wheel on the axle hub.
2.
Secure the rear drive wheel with wheel lug nuts and
hand tighten flush into the rim. Ensure that the
tapered side of the wheel lug nuts are installed facing
the rim.
3.
Lower the rear of the mower until the wheels are in
firm contact with the ground. This will prevent
slippage while tightening of the wheel lug nuts.
4.
In a crossing patter tighten all the wheel lug nuts to
approximately 48 ft/lbs.