7
Section 1: Operator Controls
7/30/12
ZSR54 & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-388SM
Table of Contents
Figure 1-10
Figure 1-11
Figure 1-12
33685
33686
33687
Park Brake Removal
Refer to Figure 1-10:
1.
Chock front wheels to secure mower and prevent
movement while repairs are made.
2.
Disconnect battery to prevent accidental shock. See
“Battery Assembly Removal” on page 22.
3.
Raise and secure rear of mower and remove rear
wheels for easy access. See “Rear Drive Wheel
Removal” on page 35.
4.
With park brake disengaged loosen and remove the
park brake handle retaining flanged lock nut.
Refer to Figure 1-11:
5.
Remove the carter pin and retaining washer from the
upper end of the brake link spring assemblies.
6.
Disconnect the brake link spring assemblies from the
park lever pivot assembly.
7.
Pull the hair pin clip and retaining washer from the
lower end of the brake link spring assemblies.
8.
Disconnect the brake link spring assemblies from the
trans-axle brake control levers.
Refer to Figure 1-12:
9.
Remove the park lever pivot assembly by pushing
the assembly to the left and compressing the
compression spring. Pull the right side of the pivot
assembly from the pivot bushing on the right hand
side and pull it up and out of the unit.