14
Section 2: Seat & Frame
ZSR54 & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-388SM
7/30/12
Table of Contents
Figure 2-4
Figure 2-5
Figure 2-6
33703
33704
Seat and Latch Installation
Refer to Figure 2-4:
1.
Align and install seat pan on seat with four bolts, lock
washers and flat washers.
2.
Center seat bolts on the seat pan slot to the middle
and tighten bolts.
Refer to Figure 2-5:
3.
Align and install seat pan pivot bushings in frame
from the inside out.
4.
Align and install seat pan assembly on unit with hex
socket bolts, raise and secure with flange nuts.
Refer to Figure 2-6:
5.
Insert washer and spring retaining bolt into the open
end of the seat springs.
6.
Align and install the seat spring into frame and
secure with flanged lock nut.
7.
Install the wavy spring washer on the seat latch
frame mount bolt.
8.
Install the latch return spring onto the latch.
9.
Align and install the latch on the seat latch frame bolt
while compressing the return spring.
10. Secure latch with the flanged lock nut, back nut off
1/8th of a turn.
