8
Section 1: Operator Controls
ZSR54 & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-388SM
7/30/12
Table of Contents
Figure 1-13
Figure 1-14
Figure 1-15
33687
33688
33689
Park Brake Installation
Refer to Figure 1-13:
1.
Align and insert the park lever pivot bushings in the
unit frame.
2.
Install compression spring on the brake handle lug
end of the park lever pivot assembly.
3.
Align and install the park lever pivot assembly into
the frame by starting with the left hand side and
compressing the spring. Install the right hand side of
the park lever pivot assembly into the frame and
allow the spring to push into place.
Refer to Figure 1-14:
4.
Assemble the brake link spring assemblies by
inserting a brake link into each end of the spring.
5.
Align and install the brake link spring assemblies
down to the trans-axle brake lever and attach to the
park lever pivot assembly.
6.
Secure both brake link spring assemblies to the park
lever pivot assembly with retaining washers and
carter pins.
Refer to Figure 1-15:
7.
Attach the bottom of the brake link spring assemblies
to the trans-axle brake control levers.
8.
Secure both brake link spring assemblies to the
trans-axle brake control levers with retaining
washers and hair pin clips.
9.
Align and install the park brake handle though the
frame and secure with carriage bolt and flanged lock
nut.
