Lamtec BT300 BurnerTronic, Manual

Page: 185 / 254

184
8 Options
External firing rate input 0/4 ... 20 mA
Measured value bar, kPa, psi, mA and digit
Resolution 12 bit
Load 150

Sampling rate >>32 Hz
External firing rate input 0 ... 10 V
Resolution 12 bit
Load 100 k

Sampling rate >>32 Hz
External firing rate input - potentiometer input
Resolution 12 bit
Load 5 k

Sampling rate >>32 Hz
External firing rate DPS Input
Sampling rate >>32 Hz
Analogue output 4 ... 20 mA
Resolution 12 bit
Accuracy 0,02 mA
Load 500 k

Sampling rate >>32 Hz
Fuel meter input (digital input)
Input frequency max. 300 Hz
Cable length max. 10m
Digital inputs (setpoint switching and reserve input)
Input frequency max. 300 Hz
Cable length max. 10 m
LAMTEC SYSTEM BUS
Bit rate 125 kbit/s
Address static LSB address, device family 1-4, selection with dip-switch
Termination integrated, activation with dip-switch
Operating conditions
Altitude above sea level

2000 m NHN Without restriction
2000 m < z

5000 m NHN Use possible with the following restrictions:
- Reduction of the maximum ambient temperature according to
the diagram
"Temperature derating LCM100 for operation >2000m NHN"
- Power supply 120 VAC
- Units for 230 VAC not approved for use > 2000 m