manualshive.com logo in svg

Lake Shore 350, User Manual

The Philips 350 is a high-quality electronic gadget equipped with advanced features and exceptional performance. Explore its detailed specifications and functionalities in our user manual, available for free download on manualshive.com. Enhance your user experience by accessing the comprehensive manual effortlessly and conveniently.

Share
Download
background image

   

6.3.4   Communication       

119

 

                                                        

   

|

   

www.lakeshore.com

 c.      In the main window of Device Manager, locate the 

Ports 

(COM & LPT)  

device type. In many instances this will be between the Network adapt-
ers and Processors items. If the 

Ports

 (COM & LPT) item is not already 

expanded, click the + icon. Lake Shore Model 350 should appear 
indented underneath 

Ports

 (COM & LPT). If it is not displayed as 

Lake Shore Model 350, it might be displayed as USB Device. If neither are 
displayed, click 

Action

 and then select 

Scan for hardware changes

, 

which may open the Found New Hardware wizard automatically. If the 
Found New Hardware wizard opens, continue to step 4.

 d.      Right-click on Lake Shore Model 350 and click 

Update Driver

.

 4. Select 

No, not at this time

 and click 

Next

.

 5. Select 

Search for the best driver in these locations

, click to clear the 

Search 

removable media (floppy, CD-ROM…)

 check box, and click the 

Include this loca-

tion in the search

 check box.

 6. Click 

Browse

 and open the location of the extracted driver.

 7. Click 

Next

.

 8. When the driver finishes installing a confirmation message stating “The wizard 

has finished installing the software for Lake Shore Model 350 Temperature Con-
troller” should appear. Click 

Finish

 to complete the installation.

6.3.3.4 Installing the USB Driver from the Included CD

The Model 350 USB driver is available on the included CD. The following section 
describes the process of installing the driver from the CD. To install the driver you 
must be logged into a user account that has administrator privileges.

For Windows 7 and Vista®
 1. Insert the CD into the computer.
 2. Follow steps 1–9 of the Windows Vista® procedure in section 6.3.3.3.3.
 3. Click 

Browse

 and select the drive containing the included CD.

 4. Ensure the 

Include subfolders

 check box is selected and click 

Next

.

 5. When the driver finishes installing a confirmation message stating “Windows has 

successfully updated your driver software” should appear. Click 

Close

 to com-

plete the installation.

For Windows® XP
 1. Insert the CD into the computer.
 2. Connect the USB cable from the Model 350 to the computer.
 3. Turn on the Model 350.
 4. When the Found New Hardware wizard appears select 

No, not at this time 

and 

click 

Next

.

 5. Select 

Install the software automatically (recommended)

 and click 

Next

.

 6. The Found New Hardware wizard should automatically search the CD and install 

the drivers. 

 7. When the Found New Hardware Wizard finishes installing the drivers a message 

stating “the wizard has finished installing the software for Lake Shore Model 350 
Temperature Controller” should appear. Click 

Finish

 to complete the installation.

6.3.4 Communication

Communicating via the USB interface is done using  message strings. The message 
strings should be carefully formulated by the user program according to some simple 
rules  to establish effective message flow control.

Summary of Contents for 350

































































































































































































Reviews:

No comments

Related manuals for 350

Accel 300+ Installation Instructions Manual preview
300+
Brand: Accel Pages: 8
Linear Technology LT8570 Demo Manual preview
LT8570
Brand: Linear Technology Pages: 7
YASKAWA J1000 CIMR-JC series Installation Manual preview
J1000 CIMR-JC series
Brand: YASKAWA Pages: 25
Magicfx FX-COMM4NDER MFX3203 User And Installation Manual preview
FX-COMM4NDER MFX3203
Brand: Magicfx Pages: 16
Elotech R 1300 Description And Operating Manual preview
R 1300
Brand: Elotech Pages: 20
Intermatic NE 1 Operating Instructions preview
NE 1
Brand: Intermatic Pages: 2
Quickie DX2-REM550 User Manual preview
DX2-REM550
Brand: Quickie Pages: 64
YASKAWA CIMR-VC*****H**-00 series Quick Start Manual preview
CIMR-VC*****H**-00 series
Brand: YASKAWA Pages: 32
Avenview SW-HBT4K-C6-4X4E Quick Start Manual preview
SW-HBT4K-C6-4X4E
Brand: Avenview Pages: 8
tecatlantis LUMINUS Operating Manual preview
LUMINUS
Brand: tecatlantis Pages: 68
B&K Reference 20 Plus A/V System Controller Owner'S Manual preview
Reference 20 Plus A/V System Controller
Brand: B&K Pages: 84
Ransburg DynaFlow A12233 Service Instruction preview
DynaFlow A12233
Brand: Ransburg Pages: 10
Apricus Advanced solar controller User Manual preview
Advanced solar controller
Brand: Apricus Pages: 32
Allen-Bradley ProcessLogix 1757-PLX52 Installation Instructions Manual preview
ProcessLogix 1757-PLX52
Brand: Allen-Bradley Pages: 24
TRIAC THD S11 SERIES Installation & Maintenance Manual preview
THD S11 SERIES
Brand: TRIAC Pages: 7
Unika PR-1V Operation Manual preview
PR-1V
Brand: Unika Pages: 4
E-MAGA Interconnect BaldurTouch II Instructions Manual preview
BaldurTouch II
Brand: E-MAGA Interconnect Pages: 21
Rain Bird ESP-MC Operation Manual preview
ESP-MC
Brand: Rain Bird Pages: 104

Brands by name

Popular brands

Load more brands