3
with letter T following directly the symbol of impact protection, i.e. FT, BT or
AT. If the safety glasses are not marked with letter T placed directly after the
symbol of impact protection, the eye protection can be used to protect
againsthighspeedparticlesatroomtemperatureonly.
n
Cleaning, maintenance, disinfection:
Do not clean the glasses with any abrasive, scratching or caustic agents.
Clean them with warm water and mild soap. After cleaning wipe them
dry with a cotton or flannel cloth. Use alcohol to disinfect the parts that
touch the user's skin.
NOTE:
«Technical
Materials used to manufacture the glasses (see table
specifications»
) usually do not cause any allergic reactions. However,
some rare cases of such reactions can occur in people allergic to plastics.
Should it occur, stop wearing the safety glasses immediately and consult a
doctor.
n
Storage and transport:
To protect the safety glasses against damage, store them in a case or soft
case provided. Store the glasses in a place at a humidity of below 90%
and at temperature ranging from 5 to 40 °C. Store them away from any
chemical and abrasive substances and at a minimum distance of 2 metres
from heating devices.
Factory packaged safety glasses can be carried by any means of transport
under conditions described above when providing additional protection
against mechanical damage.
n
Spare parts and accessories:
Use only original and properly selected spare parts.
n
Durability:
Check the safety glasses for any damage on a regular basis. The glasses
lose their usability if any damage, loss in lenses transparency,
discolorations, scratches or lens or frame cracks occurs. In such cases it is
necessary to replace the glasses by a new pair.
n
Identification of symbols:
The marks are etched on the lens and/or frame (example in Fig. ).
B
Model 46037:
CE
–
;
CE mark
2C-1.2
– catalogue number of anti-UV filter, unchanged perception of
colours;
PRX
–
;
manufacturer's ID
1
–
;
optical class
F
– symbol that marks the protection against high speed particles
moving up to 45 m/s and featuring low impact energy;
EN 166
–
.
number of standard used to assess the conformity
Model 46038:
CE
–
;
CE mark
5-3.1
–
;
sun glare filter catalog number
PRX
–
;
manufacturer's ID
1
–
;
optical class
F
– symbol that marks the protection against high speed particles
moving up to 45 m/s and featuring low impact energy;
EN 166
–
.
number of standard used to assess the conformity
Model 46039:
CE
–
;
CE mark
2-1.2
–
;
UV filter catalog number
PRX
–
;
manufacturer's ID
1
–
;
optical class
F
– symbol that marks the protection against high speed particles
moving up to 45 m/s and featuring low impact energy;
EN 166
–
.
number of standard used to assess the conformity
n
:
Notified body
The process of standard compliance assessment has been performed by
notified body NB 0530.
Address: CERTOTTICA SCARL, Zona Industriale Villanova, 32013 -
Longarone (BL). Italy
n
C :
Identification of symbols on the package
(Fig. )
1.
Polycarbonate lens
2.
Sun glare filter
3.
UV filter
4.
Protection efficiency
Manufacturer:
PROFIX Co. Ltd.
Addres:
34, Marywilska St., 03-228Warsaw, Poland
n
Technical specifications
Model
Protection efficiency
Optical class
Filter
Materials
46037
46038
46039
F
F
F
1
1
1
5-3.1
- sun glare filter
2-1.2
- UV filter
2C-1.2
– UV filter, unchanged
perception of colours;
lens
– polycarbonate
frame
– nylon
lens
– polycarbonate
frame
– nylon
lens
– polycarbonate
frame
– nylon
This
protected by copyright.
without the written consent of PROFIX Co. Ltd. is prohibited.
user's manual is
Copying it
