2
A
85 mm
100 mm
3 5 mm
X
B
5 - 3.1 PRX 1F
PRX EN166 F
+
15
o
C
1.
2.
3.
USER'S MANUAL
:
SAFETY GLASSES 46037 / 46038 / 46039
Original text translation
WARNING! These glasses do not provide unlimited
eye protection. Before you start using these
glasses read all safety use warnings and tips.
Failure to observe the safety warnings and tips provided
below may result in serious injuries.
Keep these warnings and tips for future reference.
n
Application:
These glasses are designed to provide eye protection against fast moving
fine particles. The glasses meet the requirements of Regulation
2016/425
EN 166:2001
The internet address where the EU
and
standard.
declaration of conformity can be accessed: www.lahtipro.pl
The glasses are intended to provide eye protection against mechanical
impacts caused by such particles as: metal filings, wood or wall chips,
and splashes of various liquids etc. The glasses should be worn when
carrying out various operations at sites where a risk of damage to the eye
caused by the above-listed factors occurs.
It is prohibited to use them to protect eyes during welding.
The size of glasses is universal. They offer the possibility to adjust the
length of arms (3 x 5mm) (see Fig. ) and the angle of lens (see Fig. ).
A
B
Adjustable and removable neck holder and soft elastomer ear piece tips
provide safety and comfort.
NOTE:
In case of any damage to the safety glasses stop working
immediatelyandreplacethembynewones.
WARNING: Glasses with scratched or damaged
protective lenses should be replaced.
n
Protection efficiency:
The glasses are resistant to chipping solids with a low impact energy
(hitting speed up to 45 m/s with a ball weighing 0 86 g), and protect
,
(depending on model and filter used) against sun glare, ultraviolet (UV)
radiation (see table
).
«Technical specifications»
WARNING: Eye protective glasses designed to
protect the eye against the impact of high speed
particles worn together with corrective eyeglasses
can transfer the impact causing a risk to the user.
NOTE:
If any protection against high speed solid particles at extreme
temperatures is required, the eye protection selected should be marked
4.
EN
