manualshive.com logo in svg

Labcyte Echo 520, User Manual, Page: 93 / 200

Share
Download
Labcyte Echo 520 User Manual Download Page 93

Manual Operation

4-11

4.3.1 Add new protocol

1.

From the 

P

ROTOCOLS

 window, click the 

A

DD

 button. The 

New Protocol

 

wizard will begin.

2.

Enter the protocol name (for example, 384LDV Aqueous P 10 nL) and 
select the source and destination microplate types from the drop-down 
lists. 

Figure 4.7  Entering protocol name

3.

Click the 

N

EXT

 button. The second window will open.

Figure 4.8  Add new protocol wizard, page 2

4.

Enter the number of copies (for example, 5). Each copy represents a 
single plate transfer. 

5.

Enter the liquid transfer volume (for example, 10 nL). If you enter the 
transfer volume directly instead of using the increment/decrement 
buttons, remember that the value must be an even multiple of the 
minimum transfer volume (2.5 nL). If you enter any other value, you will 
see an error message. 

Summary of Contents for Echo 520









































































































































































































Reviews:

No comments