manualshive.com logo in svg

Labcyte Echo 520, User Manual, Page: 101 / 200

Share
Download
Labcyte Echo 520 User Manual Download Page 101

Echo Liquid Handler Software

5-1

C

H A P T E R

5

C

HAPTER

 0

E

CHO

 L

IQUID

 H

ANDLER

S

OFTWARE

The Labcyte Echo liquid handler comes with user software. The Echo liquid 
handler software (referred to as the “Echo software” from this point on) 
provides a Windows-based graphical user interface (GUI). The user can 
control the Echo liquid handler and execute most of its functions, which 
include the following:

Protocols window

: defines new liquid transfer protocols and edit or 

delete existing protocols; run the protocols.

Labware window

: defines new destination plates, and edit or delete 

existing destination plate definitions.

Diagnostics window

: monitors Echo liquid handler status; directly 

control most of the Echo liquid handler motor function and perform 
diagnostic procedures.

Calibration window

: performs calibration procedures.

Advanced window

: changes transfer options; reset or shut down the 

Echo controller.

Status window

: monitors Echo liquid handler functions.

Summary of Contents for Echo 520









































































































































































































Reviews:

No comments