manualshive.com logo in svg

Labcyte Echo 520, User Manual, Page: 51 / 200

Share
Download
Labcyte Echo 520 User Manual Download Page 51

Installation and Relocation

2-7

2.3.1 Install the software

The following procedure describes installation of Client (Only) software. For 
information on installing Server software, refer to the Labcyte Echo 
Integration Guide.

To install Echo liquid handler software:

1.

Insert the Echo liquid handler software installation CD into the CD drive. 
The installation should automatically start. 

If the installation does not start:

a. Go to 

My Computer

 and double-click the drive icon for the CD drive.

b. Look for 

setup.exe

 in the directory on the CD and double-click the 

icon.

c. Select 

Install Client (Only) 

2.

Enter the Host Name or IP address that will be used by the Echo server. 
The Echo liquid handler comes pre-configured with IP address 

192.168.1.1 

and a subnet mask of 

255.255.0.0

. If you cannot use this IP 

address, run the Echo Admin Client on the Echo Server 2.4 disk to enter 
a different IP address. 

Figure 2.3  Entering host name

Summary of Contents for Echo 520









































































































































































































Reviews:

No comments