Labcyte Echo 520 User Manual Download Page 105

Page: 105 / 200

Echo Liquid Handler Software

5-5

Create a new 384:384 protocol definition

Create a new 384:384 protocol definition using the

ROTOCOL

IZARD

Note:

If the new liquid transfer protocol requires a new destination

microplate definition, create it before running the

ROTOCOL

IZARD

See “Manage labware specifications” on page 5-24

Click the

button to start the

ROTOCOL

IZARD

. Enter the

following information:



Protocol Name:

Enter a name for the new protocol. It must not

already be in use.



Source Plate Type:

Select a source plate type from the first drop-

down list.

Note:

Only Echo qualified source microplates are listed in the Source

Plate Type drop-down list. Contact Labcyte to add more source
plates.

See “Contact information” on page 7-1.



Destination Plate Type

: Select a destination plate type from the

second drop down list. The destination plate definition must already
exist in the Echo database.

Figure 5.3 Add new protocol wizard, page 1 of 2

Summary of Contents for Echo 520









































































































































































































Search results

Summary of Contents for Echo 520

Reviews:

Labcyte Echo 520, User Manual, Page: 105 / 200

Search results

Summary of Contents for Echo 520

Reviews: