66
PLM Series Operation Manual rev 1.1.3
9. Front Panel Interface
The information displayed is:
Block 2: IP Address
▸
Block 3: MAC Address
▸
Block 4: Frame ID
▸
Block 5: Network status:
▸
Primary network connection
*
Secondary network connection
*
Lake Controller software on/off-line
*
Block 6: IP Mask
▸
9.13.5.4.1 IP Address
This displays the Internet Protocol (IP) address currently set for the unit. The setting of an IP address can
only be carried out from the Lake Controller software. See
Dolby Lake Controller User Manual
chapter
7.2.6 – Technical Data.
9.13.5.4.2 MAC Address
The Media Access Control (MAC) address is the unique Ethernet address of the selected unit. It is fixed.
9.13.5.4.3 Frame ID
The Frame ID is a unique Lake product identifier, and cannot be changed.
9.13.5.4.4 Network status (‘Online’)
These indications effectively mimic the rear Ethernet connectors’ LINK LED statuses, and confirm valid
network connectivity.
9.13.5.4.5 IP Mask
This displays the IP address subnet mask currently set for the unit. It can be changed from the Lake Control-
ler software. See Dolby Lake Controller User Manual chapter 7.2.6 – Technical Data.
9.13.5.5 Latency match
This option is selected by pressing soft button 7,
(Lat. Match)
from Menu
è
Frame.
Once selected, the Latency Match function can be turned on or off with the rotary encoder. When on, the
PLM automatically introduces additional processing delay so that all channels incur a total processing delay
which equals that of the processing delay of legacy Dolby Lake equipment. See Dolby Lake Controller User
Manual chapter 7.2.6 for further information.
9.13.5.6 Display adjustments
This option is selected by pressing soft button 8,
(Front)
from Menu
è
Frame.
The parameters of the display screen itself may be adjusted here, to suit ambient lighting conditions.
9.13.5.6.1 Display Contrast
Press soft button 2 and use the rotary encoder to adjust the contrast of the display. A wide range of adjust-
ment is available.
