50
PLM Series Operation Manual rev 1.1.3
9. Front Panel Interface
CL4W
-24
HOME
10000Q
- - - -
LOW
-45
LOW MID
-11
HI MID
-13
-
∞
-
∞
-
∞
HI
-09
-02
A
1
A
2
A
3
A
4
9.12b: Single 4-way crossover
configuration
This indicates that all four output channels are driven from Module A.
In general, the four display blocks in the right-hand column (5-8) provide information relating to the output
sections or Lake Processor Module outputs, while the center two blocks in the left-hand column (2 & 3)
provide information relating to the inputs to the amplifier or the Lake processor Module inputs. The upper
and lower blocks in the left-hand column (1 & 4) display global information about the PLM (Frame data).
Figure 9.12c: Input and output
block display
9.12.1 Meter View 1 – Home View
2 AUX
FAULT/WARNING
Y-10SUB
-50
CL3W
FAULT/WARNING
Y-10
-24
FAULT/WARNING
HOME
- - - -
SUB
FAULT/WARNING
-45
LO
FAULT/WARNING
-11
MID
FAULT/WARNING
-13
-
∞
-
∞
-
∞
HI
FAULT/WARNING
-09
-02
Ω
A
1
A
2
A
3
B
4
Figure 9.12.1: Home (default) view
