PLM Series Operation Manual rev 1.1.3
9. Front Panel Interface
47
Figure 9.10c: CPL Active
Figure 9.10d: Voltage Clip
Warning or fault indications
If certain parameters within the PLM approach or exceed preset limits, a warning condition or fault condition
may arise. One or more LEDs will then provide an appropriate visual indication. A textual on-screen descrip-
tion of the condition will also be displayed adjacent to the LED(s).
The LEDs can show three colors, each conveying a different status.
9.10.2.1 Green indications
A green indication of LEDs 2, 3 and 5-8 confirm that inputs or outputs are unmuted and operating normally.
9.10.2.2 Yellow indications
Yellow LED indications are reserved for PLM warnings. See Table 9.11a.
An ‘Event Log’ file logs these warnings (with date and time stamps) within the PLM. See Chapter 5.3 of the
Lake Controller User Manual PLM Addendum for further information on accessing the Event Log.
A detailed description of each warning can be found in table 11.1.
9.10.2.3 Red indications
Red LED indications are reserved for PLM faults, clip and mute.
See table 9.11b.
An ‘Event Log’ file records these faults (with date and time stamp) within the PLM. See Chapter 5.3 of the
Lake Controller User Manual PLM Addendum for further information on accessing the Event Log.
A detailed description of each warning can be found in table 11-1.
