PLM Series Operation Manual rev 1.1.3
6. Quick Guide Overview
19
The brightness of the display and the adjoining network activity LED can be adjusted in the Frame page of
the Main menu.
Encoder
The rotary encoder is used to modify various PLM parameters (e.g. input level) in the leaf nodes of the
menu tree. When a menu item is selected that permits adjustment of parameter values, the ring around the
knob illuminates. While in HOME view the encoder can also be used to scroll through the different meter
views.
Exit
The EXIT key is used primarily while navigating the menu system in MENU mode; pressing it takes the
display back to a previous screen (“up one level” in the menu tree). In METER mode, pressing the EXIT key
always returns the display to the HOME view.
6.2 Rear Panel Overview
Ser. N:o
Removed!
CH
2
CH
1
CH
4
CH
3
CLASS 2 WIRING
SPEAKER OUTPUTS
INPUT
1
INPUT 2
LINK
1
LINK 2
AES/EBU
INPUT 1-2
LINK 1-2
LINK
SEC
PRIM
ACT
LINK
ACT
SWITCHED 10/100 Base-TX
Must be grounded/earthed
Made in Sweden
PIN 1: SCRN 2: POS 3: NEG
ANALOG WITH
I
SO-
F
LOAT
TM
200-240V 2500W
50-60Hz
PLM
0000Q
1
Ser. N:o
Removed!
CLASS 2 WIRING
SPEAKER OUTPUTS
INPUT
1
INPUT 2
LINK
1
LINK 2
AES/EBU
INPUT 1-2
LINK 1-2
LINK
SEC
PRIM
ACT
LINK
ACT
SWITCHED 10/100 Base-TX
Must be grounded/earthed
Made in Sweden
PIN 1: SCRN 2: POS 3: NEG
ANALOG WITH
I
SO-
F
LOAT
TM
1+/- CH 1+/-
2+/- CH 2+/-
1+/- CH 1+/-
2+/- CH 2+/-
3+/- CH 3+/-
4+/- CH 4+/-
1+/- CH 3+/-
2+/- CH 4+/-
200-240V 2500W
50-60Hz
PLM
0000Q
1
1
2
3
4
5
6
7
8
9
1
2
Figure 6.2a: 4-channel PLM rear panel layout
