Using Printer Management Utility
12
12-69
Setting SSL/TLS
Procedure
➜
Select the desired setting, and then click [Next].
If “Create a Self-Signed Certificate” was selected, the page shown in
“Creating a Self-Signed Certificate”
(page 12-67) appears.
If “Delete Certificate” was selected, a confirmation page appears. Click the
[OK] button. Then, click the [OK] button to log out from Administrator
mode.
If “Set Encryption Strength and Enable/Disable of SSL/TLS.” was
selected, the setup page appears. Refer to
“Enabling/Disabling SSL/TLS
and Setting Encryption Strength” on page 12-70
.
Create a Self-Signed
Certificate.
Select to create a certificate.
Delete Certificate.
Select to delete the installed certificate. This setting appears
only when there is an installed certificate.
Set Encryption Strength
and Enable/Disable of
SSL/TLS.
Select to enable or disable SSL/TLS (encryption level). This
setting appears only when there is an installed certificate.
Summary of Contents for KM-4230
Page 1: ...User s Guide Printer Controller ...
Page 9: ...Contents viii ...
Page 33: ...4 Installing the Printer Driver 4 16 ...
Page 289: ...13 Using the BOX Utility 13 22 ...
