3JF
1-1-4
Figure 1-1-1
1 Operation panel ..................................... Use the operation panel to perform the procedures required for fax
communication.
2 Telephone jack (T) ................................. Use this jack to connect a separately purchased telephone to the fax.
3 Line jack (L) ........................................... Use this jack to connect the fax to a telephone line using the modular cord.
4 Power switch .......................................... Turn this switch ON ( | ) in order to perform fax and copy operations. The
message display will light and operation will be possible.
5 Fax storage section ................................ Received faxes are stored here.
•
Document Processor
The duplex document processor for using both sides of 2-sided documents is available for use with this machine.
6 Document table ...................................... Set the documents to transmit on the table. Up to 50 sheets of up to 17"
×
11" - 5
1
/
2
"
×
8
1
/
2
" [A3 - A5] size paper can be set at one time when installing
the document processor.
7 Document insert guides ......................... Adjust these guides to match the width of the documents.
8 Document processor reversing cover .... Open this cover if a document jams.
9 Document eject cover ............................ Documents are ejected onto this cover after being scanned.
10 Eject guide ............................................. Open this guide when transmitting documents of a large size such as 8
1
/
2
"
×
14" or 11"
×
17" [A3 or Folio].
11 Document processor open/close lever ... Operate this lever when opening and closing the document processor.
1-1-2 Parts names and their functions
(1) Main body
1
2
3
4
5
6
7
8
9
0
!
