3JF
1-5-4
Contents
Remarks
Causes
Corrective measures
“The FAX is in use.”
“FAX memory is full.”
“The number of FAX transmission reservations
has reached maximum.”
“The FAX cannot be used.”
“The job has been interrupted at the FAX op-
eration panel.”
Mail notification related
Transmission report is not delivered to clients.
Copying is being
performed.
Fax printing is being
performed.
Fax setting is being
performed.
Received originals
are being transmit-
ted.
Remote diagnosis is
being performed.
Printing interrupt
occurs during trans-
mission.
Network scanner is
being used.
Maintenance mode
is being performed.
Fax memory be-
came full while
transmission was
performed.
NW-FAX transmis-
sion was tried when
50 items of fax
transmission was
reserved.
The power switch is
OFF when reception
into memory is set.
Fax is being reset.
The interrupt key
was pressed while
transmission was
performed.
NW-FAX transmis-
sion of report output
in the fax initial set-
ting is OFF or to be
performed in a spe-
cial condition.
A client mail ad-
dress is not regis-
tered in the FAX
Driver.
A client mail ad-
dress registered in
the FAX Driver is
not correct.
Retransmit after the cause described left is
cleared.
Secure memory area. (Delete data in the
memory.)
Add memory.
Retransmit with smaller resolution.
Divide originals to be transmitted.
After a while (after the number of the re-
served items is reduced), retransmit.
Turn on the power switch.
Retransmit after clearing reset.
Retransmit after interrupt was cleared.
If the setting is OFF, no report is returned
regardless of fax communication result. If a
special condition is set, a report is returned
when a special event such as fax communi-
cation error or broadcast transmission oc-
curs. If a transmission report is needed, turn
the setting ON.
Register the client mail address in the FAX
Driver initial setting.
Check the client mail address.
