Kyocera FAX SYSTEM Service Manual Download Page 52

Page: 52 / 96

Maintenance

Description

item No.

3JF

1-3-22

U614

Adjusting the DTMF output level

Description

Adjusts the DTMF output level of a push-button dial telephone.

Purpose

No change is necessary from the factory default.

Start

1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set using the up/down cursor keys.
3. Press the start key.

The screen for the selected item appears.

Adjusts the DTMF (high-frequency group) output level.
Adjusts the DTMF (low-frequency group) output level.

Display

SGL LVL DTMF (H)
SGL LVL DTMF (L)

Description

Setting

1. Change the setting using the numeric keys.

2.0 dBm
1.5 dBm
1.0 dBm
0.5 dBm
0 dBm
–0.5 dBm
–1.0 dBm
–1.5 dBm
–2.0 dBm

Setting

12
11
10

9
8
7
6
5
4

DTMF (high-/low-frequency group) output level

2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Completion

Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.

Summary of Contents for FAX SYSTEM

































































































Search results

Summary of Contents for FAX SYSTEM

Reviews:

Related manuals for FAX SYSTEM

Brands by name

Popular brands

Kyocera FAX SYSTEM, Service Manual

Search results

Summary of Contents for FAX SYSTEM

Reviews:

Related manuals for FAX SYSTEM

Brands by name

Popular brands