Kyocera FAX SYSTEM Service Manual Download Page 41

Page: 41 / 96

3JF

1-3-11

Maintenance

Description

item No.

Setting the date format

Selects the date format on the respective reports and sender’s information record.
1. Change the setting using the numeric keys.

Year/month/day
Month/day/year
Day/month/year

Display

1: YMD
2: MDY
3: DMY

Order

2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Setting if the image scanning quality in fax mode is initialized

Sets if the resolution is to be initialized when fax operation is complete.
1. Enter 1 or 2 using the numeric keys to change the setting.

Resolution is initialized.
Resolution is not initialized.

Display

1: ON
2: OFF

Description

2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Setting if the scanning density in fax mode is initialized

Sets if the scanning density is initialized when fax operation is complete.
1. Enter 1 or 2 using the numeric keys to change the setting.

Density is initialized.
Density is not initialized.

Display

1: ON
2: OFF

Description

2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Setting whether to skip unregistered abbreviated numbers and one-touch key numbers on the list

Sets whether to skip unregistered abbreviated numbers and one-touch key numbers on the list.
1. Enter 1 or 2 using the numeric keys to change the setting.

Unregistered numbers are skipped.
Unregistered numbers are not skipped.

Display

1: ON
2: OFF

Description

2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Completion

Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.

U606

(cont.)

Summary of Contents for FAX SYSTEM

































































































Search results

Summary of Contents for FAX SYSTEM

Reviews:

Related manuals for FAX SYSTEM

Brands by name

Popular brands

Kyocera FAX SYSTEM, Service Manual

Search results

Summary of Contents for FAX SYSTEM

Reviews:

Related manuals for FAX SYSTEM

Brands by name

Popular brands