Kyocera FAX SYSTEM Service Manual Download Page 51

Page: 51 / 96

3JF

1-3-21

Maintenance

Description

item No.

U612

Setting the modem detection level

Description

Sets the modem detection level.

Purpose

To improve the transmission performance when a low quality line is used.

Method

Press the start key. The current setting is displayed.

Setting

1. Change the setting using the numeric keys.

–33 dBm
–38 dBm
–43 dBm
–47 dBm

Display

1: 33
2: 38
3: 43
4: 47

Description

2. Press the start key. The value is set.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

U613

Setting the DTMF output level

Description

Sets the DTMF output level of a push-button dial telephone.

Purpose

Used if problems occur when sending a signal with a push-button dial telephone.

Start

1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set using the up/down cursor keys.
3. Press the start key.

The screen for the selected item appears.

Sets the DTMF (high-frequency group) output level.
Sets the DTMF (low-frequency group) output level.

Display

DTMF TX LEVEL (H)
DTMF TX LEVEL (L)

Description

Setting

1. Change the setting using the numeric keys.

0 to 255

Description

DTMF (high-/low-frequency group) output level

Setting range

E.g.: When set to 8, the DTMF output level is –8 dBm.

2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.

Completion

Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.

Summary of Contents for FAX SYSTEM

































































































Search results

Summary of Contents for FAX SYSTEM

Reviews:

Related manuals for FAX SYSTEM

Brands by name

Popular brands

Kyocera FAX SYSTEM, Service Manual

Search results

Summary of Contents for FAX SYSTEM

Reviews:

Related manuals for FAX SYSTEM

Brands by name

Popular brands