Kyocera Mita 1900N - B/W Laser Printer, Operation Manual

Page: 94 / 286

Interface
1-80
8
Press the
>
key. Each time the or key is pressed, the item
changes as shown below.
9
Display the item to be set and press the
ENTER
key.
For
DHCP
, a question mark (
?
) appears. For
IP Address
,
Subnet
Mask
, and
Gateway
, the cursor ( ) blinks.
10
For
DHCP
, select
On
or
Off
using the or key. For
IP Address
,
Subnet Mask
, and
Gateway
addresses, press the or key to
change the number (
000
to
255
) where the cursor is blinking. You
can use the
>
and
<
key to move the cursor right and left.
To obtain these addresses, consult your network administrator.
11
Press the
ENTER
key.
12
Press the
MENU
key. The message display returns to
Ready
.
>>DHCP
Off
>>IP Address
000.000.000.000
>>Subnet Mask
000.000.000.000
>>Gateway
000.000.000.000